Sinusoidal filter

Datashet as PDF
More sinusoidal filters or motor filters

Sinusoidal filter

BV 3573001a

Customer’s demand

The customer needs the cable outlet to go through the bottom of the housing. The minimal bending radius of the cables has to be considered. Furthermore the roof of the housing may not protrude too far over the edges to avoid that the sinusoidal filter becomes too big and can’t be mounted.


We solved this problem with an IP 23 housing with special design. The roof is made to customer specifications to redeem the requirements to size. Furthermore the housing was placed a bit higher to make the cable outlets through the bottom of the housing possible.

Technical data

Inductance: 3 x 340 µH
Current: 200 A
Current max: 270 A

© 2018 Tauscher Transformatoren GmbH                                                                                                                                   Impressum / Privacy Policy