Toroidal-transducing-transformer 4800 W

Toroidal-transducing-transformer 4,8 kW for mobile power supplies with increased Uk
Datasheet as PDF

BV 1366005b

Customer’s demand

We’d like to build a mobile power supply with 4,8 kW power for jeeps, which is firmly integrated in the car. The transformer should be small, lightweight and low on hum noise and it needs to be able to generate the net voltage for the USA out of the battery voltage. The toroidal transofmer has to be implemented in the car boy, best would be in a fitting potting. Thus the transformer should resist crash-tests. The connections may not use a lot of space. The efficiency needs to be extremely high, but the short-circuit voltage may not get too low because of this.

Solution

An optimized toroidal transformer, which is built with corded wire for the high current winding. The connection is done with a flat cable and standardized bushings. To increase Uk, a special construction of the primary- to secondary winding is made.

Technical data

Primary: 42 VDC modulated to 60 Hz sinusoidal
Secondaryr: 120-0-120 V 20 A
Dimensions: diameter 290 mm, height 120 mm
Weight: 30 kg