Toroidal isolating transformer in a housing
500 VA up to 10000 VA

1 AC-troidal isolating transformer conform to EN 61588-2-4 and 2-6 with 5000V/50Hz test voltage pri - sec and a power of 500 VA up to 10 kVA

Datasheet as PDF

Field of application

Toroidal isolating-transforemrs are used to supply loads, which need a safe insulation and an interference suppression from the net.

Description

Toroidal isolating transformers, built in a housing IP 23
Toroidal transformer for safety separation of voltages
The windings have a low capacity construction
Windings with screening
Low leakage current and high insulation resistance
Good attenuation properties agaisnt high frequency and voltage peaks
Low magnetic strayfield

Special types

Other primary- or secondary voltages
Other insulating voltages
three-phase type

Technical data

1 AC-toroidal isolating transformer
voltage range: primary 230 V (TT-net-system) and secondary 230 V
screen: static screen between pri and sec
frequency: 47-63 Hz
test voltage primary-secondary: 5000 V / 50 Hz
steel housing covered, colour RAL 7032, grey
temperature class conform to IEC 85: B
max. ambient temperature: 40°C
fire class: UL94 V0
open toroidal transformer class IP 23
terminals: pri 2m supply cable with a plug, sec socket outlet without PE
alternative: PG cable coupling, block terminals inside

Table