toroidal isolating transformer in a housing
500VA until 10000 VA

1-AC toroidal isolating transformers to DIN EN 61558-2-4 and 2-6 with
5000 V / 50 Hz test voltage pri - sec power 500 VA to 10 kVA

datasheet as PDF-File

applications

toroidal isolating transformers are used for supplying loads that must have a safe insulation and an interference suppresion from the mains.

description

toroidal isolating transformers built in a housing IP 23
toroidal transformer for safety separation of voltages
the windings have a low capacity construction
windings with screening
low leakage current and high insulation resistance
good attenuation properties against high frequency and voltage peaks
low magnetic s trayfield
enclosure of insulation material with a handgrip

special types

other primary- or secondary-voltages
other inslating voltages
three phase type

technical data

1 AC-toroidal isolating transformer
voltage range: primary 230V (TT-net) and secondary 230 V
screen: static screen between pri and sec
frequency: 47-63 Hz
test voltage primary - secondary: 5000 V / 50 Hz
steel housing covered, colour RAL 7032, grey
temperature class according to IEC 85: B
max. ambient temperature: 40°C
fire class: UL94 V0
open toroidal transformer class IP23
terminals: pri 2m supply cable with plug, sec socket outlet without PE
alternative: PG cable coupling in block terminals inside

table