banner oben

Open jobs for students
This page in German

To permanently improve our products, we work nonstop on new materials, optimized constructions and calculations. We invite students to do internships in our company or write their diploma work here.

Internships for students and technicians

1) Literature research

 

Technische Informationen
  • about thermoplastic silicon elastomers used as insualtion for small transformers

2) Market research

 

  • Pot choke pots for pot chokes used for power application for example in photovoltaic systems with new, loss reduced materials

3) Internships concerning our products

Absorption of water
  • Long term trials about the absorption of water in polyurethane cast resins
  • Design of crossovers on insulation parts by redeeming or optimizing the insulation classes IP conform to DIN 40050

4) Calculations of inductive components - calcualtion and dimensioning of toroidal chokes

  • Differences and characteristics of toroidal chokes
  • Research and usability of core producer software

5) Calculation of inductive components - sinusoidal filters

  • Basics, harmonics
  • harmonics calculation
  • Adaption to inverter characteristics
  • Calculation of frequency inverters with 20 kHz or higher
     

6) Hydrophobic surfaces

Research about lotus effect lacquers

  • for the usage on metal surfaces
  • for electrical insualtion systems
  • tests with lotus effect lacquers on inductive components

Internships for our production technology

  • no works or topics at the moment

Diploma topics

1) Insulation systems and diagnostic

sym-te-gepr

pd_ip_sign

Abstract
Optimization of the surface protection of transformers or inductive components, that are placed in humid ambients

Task description
Large distribution transforemrs, inductive components in the automotive area or for railway applications are exposed to difficult environment issues, like humidity or dirt. The surface protection has a high infleunce on the ageing and thus the lifetime of inductive components. We are developing a new surface protection with super hydrophobic characteristics similiar to the lotus effect.
Researches for appropriate materials have to be done. The items have to go through tests under multiple stress like humidity and electrical stress. Highvoltage measurements for partial discharge have to be done.

Requirements
Your are short before finishing university, electrical engineering

2) Optimization of inductive components  - saturation strong iron core chokes

small, toroidal & power transformers, toroidals, one-phase-transformers, three-phase-transformers, PCB-transformers, chokes, HF-components
  • Calculation bases for saturation strong iron core chokes
  • Limits and possibilities of the calculation with standard software
  • Calculation via electromagnetic fields
  • Harmonics and peak current calculation

 

3) Optimization of inductive components - high voltage transformers

  • Research of the winding construction
  • Construction and influence of the iron core
  • HV winding grounding and its effects

4) Research of fields in high voltage transformers and high potential transformers

\begin{figure}\centerline{\epsfxsize=12cm \epsfbox{kap2/bild_2.20-1.eps}} \end{figure}

 

5) Concept and construction of a choke test system up to 10000 A

 
  • Iron core chokes
  • Air chokes

6) Construction of a test system for large transformers up to 250 kVA

Produkte
  • Load simulation by inswitching into the company net

7) Optimization of cooling channels of dry power transformers

8) Thermal behaviour of three-phase transforemrs from 100 kVA up to 250 kVa - calculation and practical mesurement

 

 

Further information at

Dipl.- Ing. Heinz-Herbert Berger                   
Tel. 08551 91696-112 oder Tel. 0160 98 95 24 77

Heinz.Berger(at)tauscher.com

back