three-phase transformer
from 16 kVA to 250 kVA 6kV 10kV in enclosure

three-phase transformers with cooling channels
three-phase power dry transformers
three-phase isolation transformer in
a metal sheet housing IP23  
cast resin transformer
datasheet as PDF-File

applications

transformer according to EN 60076 VDE 0532 to transform 6kV or 10kV to 0,4kV
in vector group Dyn 11

description

Three-phase transformer, constructed as an isolation transformer according to EN 60076 IEC 726, built in a housing IP23. It is possible to build each transformer in this family in each vector group. Is no vector group mentioned, we use group Dyn5. (star point can have full load from outside conductor).
Please have a look at the difference between outside conductor voltage (voltage phase to phase) and voltage phase to star point at the different vector groups.
The metal housings are prepared for mounting on the floor. For the connection of cables, there are PG cable couplings used. For safe and easy transportation, the transformer housings have crane hooks at the upper side. Tauscher cast resin transformers need less space than comparable oiltransformers. The transformers don’t need any maintenance, they are barely combustible and selfextinguishing. The isolation of the windings is made of environment-friendly polyurethan- or epoxid casting resin.

table