three-phase transformer
from 16kVA to 250kVA 6kV 10kV

three-phase transformers with cooling channels
three-phase power dry transformers
three-phase isolation transformer
cast restin transformer
datasheet as PDF-File

applications

transformer according to EN 60076 VDE 0532 to transform 6kV or 10kV to 0,4kV in
vector group Dyn 11

description

Three-phase transformer, built as an isolation transformer according to EN 60076 IEC 726, prepared for safety class I. It is possible to build each transformer in this family in each vector group. Is no vector group mentioned, we use group Dyn11. (star point can have full load from outside conductor).
Please have a look at the difference between outside conductor voltage (voltage phase to phase) and voltage phase to star point at the different vector groups. The mounting must be done in a way, that a convection through the cooling channels is possible.
For safe and easy transportation, the transformers have crane hooks at the upper side. Tauscher cast resin transformers need less space than comparable oiltransformers. The transformers don’t need any maintenance, they are barely combustible and selfextinguishing. The isolation of the windings is made of environment-friendly polyurethan- or epoxid casting resin.

table